Tired of the same gameplay in The Elder Scrolls 3: Morrowind? Use console commands and cheats to liven up your experience. Spawn Skooma on demand, fly, and alter NPC scale with just a few keystrokes. This article will provide a comprehensive list of codes and instructions for using them in the game. Get ready to take your game to the next level.
How to Use Morrowind Console Commands?
To use the console commands in The Elder Scrolls 3: Morrowind, just follow the below steps.
- Open the developer console screen.
- Tap the tilde (~) key, which can be found under the Esc key. (to the left of the 1 key on an American English keyboard)
- Tap the grave (`) key (which is located in the same place), if you’re using a British English keyboard.
When entering commands in the console, case sensitivity is not a concern. Ignore the <> brackets and # when using commands with sections like <itemID> <#>, instead, type the name of the item and the desired quantity.
The Elder Scrolls 3: Morrowind Console Commands
Here is a list of all the Morrowind console commands that you can use in the game to gain an advantage. By using these console commands you can kill, add gold, item, and item ids, get skills, and attributes, carry weight, become invisible, and can level up in the game. So, let’s take a look at all the Morrowind console commands for PC.
Morrowind General Console Commands
Effect | Cheat |
Flight mode | setflying 1 |
Super jumps | setsuperjump 1 |
Walk on water | setwaterwalking 1 |
Breathe underwater | setwaterbreathing 1 |
Set Stat/Skill | set [stat/skill] [number] |
Add indicated amount of gold | additem “Gold_100” [number] |
Set maximum fatigue value | setfatigue [number] |
Set maximum magic value | setmagicka [number] |
Set player health | sethealth [number] |
Place character in the named cell | centeroncell -or- coc [cell ID] |
Place character in exterior cell grid | centeronexterior -or- coe [x,y] |
Create map image file for Xbox | createmaps [“filename.esp”] |
Add all entries to journal | filljournal |
Show all the towns on full map | fillmap |
Teleport 128 units from location | fixme |
Get faction reaction | getfactionreaction [faction ID] |
Show help commands | help |
Show variables | showvars -or- sv |
Stop cell test | stopcelltest -or- sct |
Test cells | testcells -or- tc |
Test interior cells | testinteriorcells -or- tic |
Test models | testmodels -or- t3d |
Toggle AI | toggleai -or- ta |
Toggle borders | toggleborders -or- tb |
Toggle combat statistics | togglecombatstats -or- tcs |
Toggle collisions | togglecollision -or- tcl |
Toggle collision boxes | togglecollisionboxes -or- tcb |
Toggle collision grid | togglecollisiongrid -or- tcg |
Toggle debug text | toggledebugtext -or- tdt |
Toggle dialogue statistics | toggledialoguestats -or- tds |
Toggle fog of war | togglefogofwar -or- tfow |
Toggle God mode | togglegodmode -or- tgm |
Toggle grid | togglegrid -or- tg |
Toggle kill statistics | togglekillstats -or- tks |
Toggle load fade | toggleloadfade |
Toggle magic statistics | togglemagicstats -or- tms |
Toggle magic statistics | togglemagicstats -or- tms |
Toggle menus | togglemenus -or- tm |
Toggle path grid | tpg |
Toggle scripts | togglescripts |
Toggle stats | togglestats -or- tst |
Toggle sky | togglesky -or- ts |
Toggle texture string | toggletexturestring -or- tts |
Toggle wireframe | togglewireframe -or- twf |
Toggle world | toggleworld -or- tw |
Show ownership and script name | togglefullhelp -or- tfh |
Show selected actor’s party | sg |
Show selected actor’s targets | st |
Show scene graph | showscenegraph -or- ssg |
One to one mode | moto |
Toggle water/no water | twa |
Toggle vanity mode | tvm |
Toggle script output | tso |
Toggle load fade | tlf |
Toggle bot AI | tai |
Display output info | ori |
Toggle lighting | tl |
Show variables | sv |
Show animations | sa |
Reset enemies, NPCs, players | ra |
Purge textures | pt |
Morrowind Targeted Commands
Cheat Code | Description |
lock <#> | Locks the targeted door or container. Replace # with a numeral between 0-100, with the number representing the lock level required. The closer to 100, the more skill is required to pick. |
unlock | Unlocks the targeted door or container. |
resurrect | Brings an NPC back from the dead, complete with all their items. Can also be used on dead creatures. |
showgroup | Displays the members of the target group. |
showtargets | Displays the targets of the selected NPC actor. |
Morrowind Quest Commands
Cheat Code | Description |
addtopic <topicID> | Adds the specified topic. |
filljournal | Adds all entries to the journal. |
journal <questID>, <queststage> | Adds dialogue to your journal for the specified stage of the specified quest. |
Morrowind Character Commands
Cheat Code | Description |
additem <itemID> <#> | Adds a specified amount of a specified item to the player’s inventory. |
addspell <spellID> | Adds a specified spell to the player’s skills. |
enablestatreviewmenu | Opens the character modification menu, where stats and player race can be changed. |
fixme | Moves the player character 128 units from their current location. |
setfatigue <#> | Set the maximum fatigue for the player character. |
setflying <#> | Turns on flying mode. The player must cast a levitate spell after using the command to start flying. Use number <1> to activate the mode, and <0> to disable it. |
setlevel <#> | Changes the player character’s overall level to the specified number. The game needs to be quit and restarted in order for the effects to take place. |
sethealth <#> | Sets the maximum health of the player character to the specified amount. |
setcurrenthealth <#> | Sets the current health of the player character to the specified amount. |
setmagicka <#> | Sets the maximum magic reserves of the player character to the specified amount. |
setpccrimelevel <#> | Sets the player character’s bounty price to the specified amount. |
setreputation <#> | Sets the player character’s reputation level to the specified amount. |
setsuperjump <#> | Allows player character to jump very high. Use <1> to enable and <0> to disable. |
setwaterbreathing <#> | Allows player character to breathe underwater. Use <1> to enable and <0> to disable. |
setwaterwalking <#> | Allows player character to walk on water. Use <1> to enable and <0> to disable. |
set<av> <#> | Sets the state level to the specified value. Replace <AV> with a skill, such as bluntweapon, or an attribute, such as strength. |
Morrowind Toggle Commands
Cheat Code | Description |
togglegodmode | Toggles on and off God Mode, which makes the player invulnerable to traditional damage. Invulnerability does not prevent damage received when attacking enemies with reflect. |
toggleai | Toggles on or off the artificial intelligence of NPCs and creatures. |
toggleborders | Toggles on or off the display of exterior cell borders. |
togglecombatstats | Toggles on or off combat statistics. |
togglecollision and togglecollisionboxes | Toggles on and off clipping and collision detection for the player and nearby NPCs. |
togglecollisiongrid | Toggles on and off the display of the collision grid. |
toggledebugtext | Toggles on and off the display of debug text, such as frame rate. |
togglefogofwar | Toggles on and off the fog of war on the automap. |
togglefullhelp | Toggles on and off the display of text detailing ownership and script of objects you look at. |
togglegrid | Toggles on and off the display of the grid around active cells. |
togglekillstats | Toggles on and off a display of player kill count after each new kill. |
togglemenus | Toggles on and off menus and interface. Great for taking clean screenshots or increasing game immersion. |
togglestats | Toggles on and off display various debug statistics. |
togglesky | Toggles on and off the sky. |
toggleworld | Toggles on and off the world. When turned off, the whole world disappears, although only rendering is actually hidden. Objects still exist and collision detection will still occur. |
togglewireframe | Toggles on and off the display of 3D wireframes. |
togglepathgrid | Toggles on and off the display of path grids, which show where NPCs can walk. |
Morrowind Game Commands
Cheat Code | Description |
addsoulgem <creatureID>,<soulgemID> 1 | Adds a soul gem filled with the specified creature’s soul to the player’s inventory. |
centreoncell <cellID> | Moves player character to the specified cell. |
centreonexterior <x, y> | Moves the player character to the center of the exterior cell specified. Coordinates on the x and y map axis are required. |
fillmap | Shows all towns on the world map. |
getfactionreaction <factionID> <factionID> | Shows the reaction values of the two factions. |
getpos <#> player | Displays the coordinates of the player character on the map. Replace # with x, y, or z. |
help | Displays a list of most shorthand commands. |
placeatpc<objectID>, <count>, <distance>, <direction> | Places an object near the player. Count, distance, and direction all must be expressed as numerical values. The count will be the number of objects, distance is the length away from the player character the object will spawn, and direction can be <1> for in front or <3> for behind the player character. |
modfactionreaction <factionID> <factionID> <#> | Adjusts the reaction value from one faction to another to the specified amount. |
resetactors | Returns NPC characters to their original locations. |
set gamehour to <#> | Sets the time in the game to the specified time. Only full hours can be set, and the game uses a 24-hour clock. Use 0-23 to replace <#>. |
set timescale to <#> | Sets the speed of the progression of time within the game. <1> will apply real-time speed. <30> is the default, which is 48 minutes for each in-game day (30 times the speed of real-time) |
show <variable> | Shows the numerical value of a specified variable. |
showscenegraph | Opens a new window displaying information about the game’s renderers. |
showvars | Shows a list of all global and/or local variables. |
Morrowind Console Commands Not Working
In case the given Morrowind console commands not working then make sure that when you’re trying to add the item, you have the quotations around them and just the item ID, not the quantity you’re trying to add.
How to become Invincible in The Elder Scrolls 3: Morrowind?
To become invincible in Morrowind, just follow the below steps.
- You need a Sanctuary spell, a suit of clothing (gloves, shirt, pants, rings, amulets, everything you can wear) with lots of enchantment capacity.
- Enchant them with the sanctuary spell. Do this to all of them, or at least until you reach 100 sanctuaries.
- What sanctuary does is it lowers the chance of someone hitting you. if you make it 100, they can’t touch you with their blades or fists. This way you will be nearly invincible (you can still be affected by magic).
- If you are a Breton, all you need is the Curiuss of Savior’s Hide to be invincible or If you can’t summon a golden saintor you don’t feel like going out and getting a bunch of Master soul gems, you can just trap the golden saint in one Master soul gem, then get rats, and other stupid things in your petty soul gems.
- When you’re enchanting, all you do is select the Master soulgem with the golden saint, switch the effect over to constant, then switch to a crappy soul. The constant effect will still be there for you to use.
That is, you’ll become invincible in Morrowind.